1. TD Duct Panel with 52 2kg/m density, 20mm thickness, coated on both side with 75 micron embossed aluminium foil and coupled with layers of corrosion resistant paint.2. TD Duct Panel (Smooth + Embossed) with 52 2kg/m density, 20mm thickness, coated on both side with 75 micron thick aluminium foil, embossed on one side and smooth on the other side and both coupled with layers of corrosion resistant paint. 3. Super TD (smooth + embossed) Out door use - with 52 +- 2kg/m3 density, 20 mm thickness, coated on both side with 75 micron thick aluminium foil coupled with layers of corrosion resistant paint, and 225 micron aluminium composite colour coupled on the other side.
Accessories For TD Duct
.jpg)
1. Special Sealant (Neutral) to ensure air quality inside duct and prevent air leakage.2. This special glue has been specifically formulated to obtain perfect adhesion on TD Pre-Insulated Aluminium Ducts panel foam. The product is supplied ready to use. Always make sure to provide adequate ventilation.
1. 45 Left or Right Cutter Knife
This jack planes have an appropriate internal lodge in which can
be find 5 blades together with one hexagonal wrench.They are
supplied in different colours according to the angle blade.These
comfortable jack planes is painted cast aluminium have a special
ergonomic shape that permits cuts to be followed with speed and
precision.
2. Straight and V Cutter Knife
This comfortable and handy jack planes is supplied in painted cast
aluminium. The correct blade length also permits V cut in the panels
without marking the interior aluminium foil. It is particularly easy
to manoeuvre and is used supported by rulers, while the slotted holes
at the sides permit rapid blade replacement.
3. Manual Bending Tools
The manual bending tool is used to make radius elbow and fittings.
Best result can be obtained because of the simple usage of this tool.
4. Aluminium Ruler (1200 mm & 4000mm)
This Aluminium ruler with locking system for an easy and fast locking
of the panel to work table. This ruler serves asa a guides for the cutter
knife and permits to make precise and straight cuts.
5. Table complete with carpet for cover 4 x 1.2m.
The table is an effective tool used to cut and construct the TD Duct.
It is design ergonomically to provide easy and best result. The carpet
is used to ensure smooth cutting process and to protect the blade to
a more long term use.
This jack planes have an appropriate internal lodge in which can
be find 5 blades together with one hexagonal wrench.They are
supplied in different colours according to the angle blade.These
comfortable jack planes is painted cast aluminium have a special
ergonomic shape that permits cuts to be followed with speed and
precision.
2. Straight and V Cutter Knife
This comfortable and handy jack planes is supplied in painted cast
aluminium. The correct blade length also permits V cut in the panels
without marking the interior aluminium foil. It is particularly easy
to manoeuvre and is used supported by rulers, while the slotted holes
at the sides permit rapid blade replacement.
3. Manual Bending Tools
The manual bending tool is used to make radius elbow and fittings.
Best result can be obtained because of the simple usage of this tool.
4. Aluminium Ruler (1200 mm & 4000mm)
This Aluminium ruler with locking system for an easy and fast locking
of the panel to work table. This ruler serves asa a guides for the cutter
knife and permits to make precise and straight cuts.
5. Table complete with carpet for cover 4 x 1.2m.
The table is an effective tool used to cut and construct the TD Duct.
It is design ergonomically to provide easy and best result. The carpet
is used to ensure smooth cutting process and to protect the blade to
a more long term use.